Filaments from high performance plastics

Over 50 years of experience in the extrusion of a broad range of engineering and high performance plastics, have led to high precision filaments and enable us to produce special filaments like carbon-filled PEEK.

  • Our filaments meet highest quality standards regarding tolerance and roundness deviation.
  • The diameter of the filaments are strictly produced with tight tolerance specifications, checked and recorded in order to minimize error susceptibility and inaccuracy during 3D printing.
  • Controlled raw materials allow us to produce very homogeneous finished products.
  • Controlled residual moisture is assured by pre-dried granules and airtight final packaging.


Alongside the filaments in stock, we can also create customized compounds made, for example, from PEEK, PEI, PVDF or PPSU.

Our filament materials are available in stock in the sizes ø 1.75 ± 0.05mm.

PEEK - Polyetheretherketone

Filaments made from PEEK offer a high long-term service temperature of 260 °C, exceptional chemical resistance and outstanding wear and abrasion resistance.

  • TECAFIL PEEK 3D10 natural
  • TECAFIL PEEK 450G natural
  • TECAFIL PEEK 450G black
  • TECAFIL PEEK 450G blue
  • TECAFIL PEEK 820 natural
  • TECAFIL PEEK CF30 black
Filament PEEK plastic Ensinger

PPSU - Polyphenylsulfone

PPSU filaments offer outstanding hydrolysis resistance (suitable for repeated steam sterilisation) and very good resistance to ionizing radiation (gamma and X-rays).

  • TECAFIL PPSU natural
Filament PPSU plastic Ensinger

PSU - Polysulfone

PSU filaments offer a high operating temperature up to 160 °C, very good resistance to hydrolysis (suitable for repetitive steam sterilisation) and high toughness, even at low temperatures.
  • TECAFIL PSU natural

PES - Polyethersulfone

PES filaments offer good electrical insulating properties, excellent chemical resistance and good hydrolysis-resistance.
  • TECAFIL PES natural

PEI - Polyetherimid

PEI filaments offer a high permanent operating temperature (170 °C), high creep resistance over a wide temperature range and high dimensional stability.
  • TECAFIL PEI 1000 black
  • TECAFIL PEI 9085 natural

PVDF - Polyvinylidene fluoride

PVDF filaments offer high chemical resistance, low density compared to other fluoropolymers and practically no moisture absorption.

  • TECAFIL PVDF natural
Filament PVDF Ensinger

POM - Acetal Polyoxymethylene

POM filaments offer high strength, rigidity and toughness, good impact strength, low moisture absorption, outstanding wear resistance and sliding properties and excellent machinability.
  • TECAFIL POM AH natural
  • TECAFIL POM AH SD natural (anti static agent)

PA - Polyamide

Polyamide filaments offer high wear resistance, high thermal stability, very good strength and hardness and good sliding properties.
  • TECAFIL PA12 natural