TECATRON natural

PPS unfilled

Polyphenylenesulphide (PPS) - TECATRON - is a semi crystalline, high temperature thermoplastic. Due to its chemical structure, PPS is a very resistant polymer with high mechanical strength and rigidity, even at temperatures above 200°C. In addition to the low water absorption, PPS also shows good dimensional stability, low tendency to creep and excellent electrical properties, and is thus well suited for parts with tightest tolerances. Furthermore, unfilled PPS is very chemically stable, even at high temperatures, but does show sensitivity to UV radiation when uncoloured. There is no known solvent that dissolves TECATRON PPS at temperatures below 200°C (392°F).

Facts

Chemical designation
PPS (Polyphenylensulfide)
Colour
beige
Density
1,36 g/cm3

Main Features

  • good heat deflection temperature
  • good chemical resistance
  • resistance against high energy radiation
  • high strength
  • high dimensional stability
  • high stiffness
  • high creep resistance

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Modulus of elasticity
    (tensile test)
    4100MPa1mm/minDIN EN ISO 527-2
    Compression modulus3300MPa5mm/min, 10 NEN ISO 604
    Impact strength (Charpy)80kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Elongation at yield6,5%50mm/minDIN EN ISO 527-2
    Tensile strength at yield103MPa50mm/minDIN EN ISO 527-2
    Tensile strength103MPa50mm/minDIN EN ISO 527-2
    Notched impact strength (Charpy)kJ/m2max. 7,5JDIN EN ISO 179-1eA
    Flexural strength151MPa2mm/min, 10 NDIN EN ISO 178
    Elongation at break (tensile test)6,5%50mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (flexural test)
    3600MPa2mm/min, 10 NDIN EN ISO 178
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Thermal expansion (CLTE)610-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Service temperature230Clong termNN
    Glass transition temperature97CDIN EN ISO 11357
    Thermal expansion (CLTE)510-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Service temperature260Cshort termNN
    Melting temperature281CDIN EN ISO 11357
    Heat distortion temperatureCHDT, Method AISO-R 75 Method A
    Thermal conductivity0.25W/(k*m)ISO 22007-4:2008
    Specific heat1.0J/(g*K)ISO 22007-4:2008
    Thermal expansion (CLTE)1110-5*1/K100-150°C, long.DIN EN ISO 11359-1;2
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    Dielectric strengthkV/mmDIN 53483-1
    volume resistivity1014O*cmDIN IEC 60093
    surface resistivity1014ODIN IEC 60093
  • Other properties
    Other propertiesValueUnitParameterNorm
    Water absorption%saturation (23°C)DIN EN ISO 62
    Water absorption0.01%24h / 96h (23°C)DIN EN ISO 62
    Resistance to hot water/ bases+--
    Flammability (UL94)V0-corresponding toDIN IEC 60695-11-10;
    Resistance to weathering---
    HZ Technical guidelinesyeslbs/in^2-
    HZ Semicon brochureyes--
    HZ Food technologyyes--
    HZ-Catalogueyes--

Stock program