PEEK filament TECAFIL PEEK VX blue 655px
PEEK filament TECAFIL PEEK VX blue 655px
288.00 EUR

TECAFIL PEEK VX blue - 1.75 mm

PEEK FILAMENT BLUE

TECAFIL PEEK VX blue is a high temperature PEEK filament based on Victrex® PEEK. It is a blue colored version of an unfilled PEEK (polyetheretherketone) filament.
The base polymer of this filament meets the requirements for food contact according to (EC) No 1935/2004, (EU) No 10/2011, (EC) No 2023/2006 and FDA. Migration tests according to EU 10/2011 were successfully performed on similar extruded specimens. Legally binding documents must be requested separately.
The blue colour of this PEEK filament makes it applicable for optical detection in the food industry, as it enables the identification of unwanted particles in the product.
The combination of food conformity and PEEK typical mechanical, thermal and chemical properties make this filament a perfect choice for demanding food processing applications.
VICTREX® PEEK is a registered trademark of Victrex plc.

Compliances

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
blue
Density
1.3 g/cm3 (*2)

Main Features

  • inherent flame retardant
  • very good chemical resistance
  • good slide and wear properties
  • good heat deflection temperature
  • resistance against high energy radiation
  • hydrolysis and superheated steam resistant

Target industries

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    General material information Value Unit Parameter Norm
    Diameter 1,75 +/- 0,05 mm -
    Spool measurements Ø 52 mm holder -
    Spool measurements 55 mm width -
    Spool measurements Ø 200 mm outer diameter -
    Spool Material Polycarbonate - -
    Filament Load per Spool 500 g -
  • product-technical-detail-collapse-item-1-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 95 MPa 50 mm/min DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    3700 MPa 50 mm/min DIN EN ISO 527-1
    Elongation at break (tensile test) 25 % 50 mm/min DIN EN ISO 527-1
    Flexural strength - MPa 2 mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    - MPa 2 mm/min, 10 N DIN EN ISO 178
  • product-technical-detail-collapse-item-2-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 143 C ASTM D 3418
    Melting temperature 343 C DIN EN ISO 11357
    Deflection temperature 162 C HDT-A ISO-R 75 Method A
    Service temperature 300 C short term -
    Service temperature 260 C long term -
    Thermal expansion (CLTE) 5 10-5*1/K DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Moisture absorption 0,03 % DIN EN ISO 62
    Melt flow index (MFI) 8 g/10 min 380°C / 5kg DIN EN ISO 1133
  • product-technical-detail-collapse-item-4-lvl-1
    Processing parameter Value Unit Parameter Norm
    Nozzle temperature 420 - 440 C -
    Max. melt temperature 470 C -
    Print bed temperature 160 - 250 C -
    Build chamber temperature 160 - 230 C -
    Nozzle diameter 0,4 mm -
    Print speed 20 - 30 mm/s -
    Fan speed 0 % -
  • product-technical-detail-collapse-item-5-lvl-1
    Predrying Value Unit Parameter Norm
    Drying temperature 120 C -
    Drying time 8 h -