PEEK Compound TECACOMP PEEK GF40 natural

TECACOMP PEEK GF40 natural 1077758

PEEK Compound 40% glass fibre reinforced – ultra-stiff & high-temperature stable

add to list
product enquiry
request sample

TECACOMP PEEK GF40 natural represents the highest mechanical performance within the glass fibre reinforced TECACOMP PEEK portfolio. With 40 % glass fibre reinforcement, it achieves outstanding tensile strength, flexural strength, and stiffness. Ideal for highly loaded structural components produced via injection moulding and operating under demanding thermal and mechanical conditions.

Compliances

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
natural
Density
1.61 g/cm3

Main Features

  • high stiffness
  • high strength
  • very good heat resistance
  • high creep resistance
  • very good chemical resistance
  • hydrolysis and superheated steam resistant
  • for injection moulding

Target industries

mechanical engineering
chemical technology
automotive industry
vacuum technology

Downloads

Datasheet (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 198 MPa DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)    		 14100 MPa DIN EN ISO 527-1
    Elongation at break (tensile test) 2,4 % DIN EN ISO 527-1
    Impact strength (Charpy) 62 kJ/m2 DIN EN ISO 179-1eU
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 143 C -
    Melting temperature 343 C -
    Service temperature 300 C short term -
    Service temperature 260 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1013 Ω DIN EN 61340-2-3
    volume resistivity 1014 Ω*cm DIN EN 61340-2-3
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
  • product-technical-detail-collapse-item-4-lvl-1
    Processing parameter Value Unit Parameter Norm
    processing temperatures 360 - 400 C -
    Mould temperature 160 - 210 C -
  • product-technical-detail-collapse-item-5-lvl-1
    Predrying Value Unit Parameter Norm
    Permissible residual moisture content 0,1 % -
    Drying temperature 120 - 140 C -
    Drying time 4 h -