TECASINT 8061 yellow-brown

PTFE with 40 % polyimide

TECASINT 8061 has been made from PTFE with a modification of 40 % PI. Compared with TECASINT 8001 it has a lower creep tendency under load, along with outstanding sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.

Facts:

Chemical Designation:
PTFE (Polytetrafluorethylene)
Colour:
brown-beige
Density:
1,68 g/cm3

Main Features:

  • very good slide and wear properties
  • anti adhesive
  • very good electrical insulation
  • high toughness
  • very good UV and weather resistance
  • good chemical resistance
  • sensitive to hydrolysis in higher thermal range

Target Industries:

Downloads:

Technical Details


  • Mechanical properties
    Mechanical propertiesValueUnitParamsNorm
    Notched impact strength (Charpy)2.5kJ/m2max 7.5 J, 23°CDIN EN ISO 179-1eA
    Impact strength (Charpy)5.4kJ/m2max 7.5 J, 23°CDIN EN ISO 179-1eU
    Shore hardness70DShore D, 23°CDIN 53505
    Tensile strength13MPa50 mm/min, 23°CDIN EN ISO 527-1
    Elongation at break4%50 mm/min, 23°CDIN EN ISO 527-1
    Flexural strength29MPa10 mm/min, 23°CDIN EN ISO 178
    Compression strength60MPa10 mm/min, 23°CEN ISO 604
  • Thermal properties
    Thermal propertiesValueUnitParamsNorm
    Glass transition temperature20CDIN EN ISO 11357
    Service temperature270Clong-term-
    Thermal expansion (CLTE)-10-5*1/K50-200°CDIN 53 752
    Specific heat1J/(g*K)-
    Thermal conductivity0.25W/(k*m)40°CISO 8302
  • Electrical properties
    Electrical propertiesValueUnitParamsNorm
    volume resistivity1017O*cm23°CDIN IEC 60093
  • Other properties
    Other propertiesValueUnitParamsNorm
    Water absorption1.12%24 h in water, 23°CDIN EN ISO 62
    Flammability (UL94)V0-corresponding toDIN IEC 60695-11-10;

Stock program