TECAMID 6 GF30 black

PA 6 glass fibre reinforced

PA 6 GF30 is a 30 % glass fibre reinforced polyamide that we manufacture under the trade name TECAMID 6 GF30 black. It offers higher strength, rigidity, creep strength and dimensional stability than unreinforced polyamide 6. These PA6 GF30 properties make this material suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. As glass fibres tend in some cases to have a marked abrasive effect on mating surfaces, glass filled nylon 6 is less suitable for sliding applications.


Chemical designation
PA 6 (Polyamide 6)
1,36 g/cm3

Main Features

  • very high strength
  • resistant to many oils, greases and fuels
  • good wear properties
  • good weldable and bondable
  • high dimensional stability
  • good heat deflection temperature
  • good machinability

Target industries

Technical details

  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Tensile strength at yield98MPa50mm/minDIN EN ISO 527-2
    Elongation at break (tensile test)5%50mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    5700MPa1mm/minDIN EN ISO 527-2
    Tensile strength98MPa50mm/minDIN EN ISO 527-2
    Elongation at yield4%50mm/minDIN EN ISO 527-2
    Flexural strength140MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    5200MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength21/42/107MPa1% / 2% / 5%EN ISO 604
    Compression modulus4200MPa5mm/min, 10 NEN ISO 604
    Impact strength (Charpy)60kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Ball indentation hardness232MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Glass transition temperature49CDIN EN ISO 11357
    Service temperature180Cshort termNN
    Service temperature100Clong termNN
    Melting temperature218CDIN EN ISO 11357
    Thermal expansion (CLTE)610-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)610-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Thermal conductivity0.41W/(k*m)ISO 22007-4:2008
    Specific heat1.3J/(g*K)ISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    volume resistivity1014O*cmSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    surface resistivity1014OSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    Dielectric strength32kV/mm23°C, 50% r.h.ISO 60243-1
    Resistance to tracking (CTI)475VPlatin electrode, 23°C, 50% r.h., solvent ADIN EN 60112
  • Other properties
    Other propertiesValueUnitParameterNorm
    Water absorption0.3%24h / 96h (23°C)DIN EN ISO 62
    Flammability (UL94)HB-corresponding toDIN IEC 60695-11-10;
    Resistance to hot water/ bases(+)--
    Resistance to weathering(+)-NN

Stock program