TECAPEEK MT CF30 black

Medical PEEK carbon fibre reinforced

Ensinger's PEEK CF30, otherwise known as TECAPEEK CF30 black, can also be supplied in a version that is suitable for medical applications. For this PEEK CF 30 medical grade, special carbon fibres are combined with Victrex® PEEK 450G polymer in order to fulfil the requirements for biocompatibility, which are tested on the stock shape. Ensinger will issue the relevant certification on an order specific basis.

Compliances

Facts:

Chemical Designation:
PEEK (Polyetheretherketone)
Colour:
black
Density:
1,42 g/cm3

Main Features:

  • very high stiffness
  • very high creep resistant
  • very good chemical resistance
  • good wear properties
  • biocompatible
  • good heat deflection temperature
  • very good sterilisable

Target Industries:

Technical Details


  • Mechanical properties
    Mechanical propertiesValueUnitParamsNorm
    Modulus of elasticity
    (tensile test)
    6000MPa1mm/minDIN EN ISO 527-2
    Tensile strength115MPa50mm/minDIN EN ISO 527-2
    Tensile strength at yield115MPa50mm/minDIN EN ISO 527-2
    Elongation at yield5%50mm/minDIN EN ISO 527-2
    Elongation at break5%50mm/minDIN EN ISO 527-2
    Flexural strength188MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    6000MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength22/43/108MPa1% / 2% / 5%EN ISO 604
    Compression modulus4500MPa5mm/min, 10 NEN ISO 604
    Impact strength (Charpy)58kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Ball indentation hardness318MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParamsNorm
    Glass transition temperature146CDIN EN ISO 11357
    Melting temperature341CDIN EN ISO 11357
    Service temperature300Cshort termNN
    Service temperature260Clong termNN
    Thermal expansion (CLTE)510-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)510-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal conductivity0.59W/(k*m)ISO 22007-4:2008
    Specific heat1.7J/(g*K)ISO 22007-4:2008
    Thermal expansion (CLTE)710-5*1/K100-150°C, long.DIN EN ISO 11359-1;2
  • Electrical properties
    Electrical propertiesValueUnitParamsNorm
    surface resistivity1010OConductive rubber, 23°C, 12% r.h.DIN EN 61340-2-3
    volume resistivity1011O*cmConductive rubber, 23°C, 12% r.h.DIN EN 61340-2-3
  • Other properties
    Other propertiesValueUnitParamsNorm
    Resistance to hot water/ bases+--
    Flammability (UL94)V0-corresponding toDIN IEC 60695-11-10;
    Resistance to weathering---
    Water absorption0.03%24h / 96h (23°C)DIN EN ISO 62

Stock program