TECANYL VH2 grey

PPE plastic for Aircraft Interiors

​TECANYL VH2 grey uses the same base polymer as TECANYL VH2 black, and is a specially formulated PPE plastic (Polyphenylene ether) designed for use in commercial aircraft interior design when grey would be a more suitable color for the intended use.  The material has been tested to and passed the requirements for FAR 25.853 for aircraft interior materials, and also meets specific customer specifications for aircraft interior cabin plastic products. 

Compliances

Facts:

Chemical Designation:
PPE (Polyphenylene ether)
Colour:
grey
Alternative colours available
black
Density:
1,1 g/cm3

Main Features:

  • flame retardant as per FAR 25.853
  • excellent dimensional stability
  • very good chemical resistance
  • flame retardant according to UL94 V-0
  • low smoke emissions
  • low moisture absorption
  • good electrically insulating

Target Industries:

Downloads:

Technical Details


  • Mechanical properties
    Mechanical propertiesValueUnitParamsNorm
    Flexural strength95MPa2mm/min, 10 NDIN EN ISO 178
    Elongation at break22%50mm/minDIN EN ISO 527-2
    Elongation at yield14%50mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    2300MPa1mm/minDIN EN ISO 527-2
    Tensile strength at yield57MPa50mm/minDIN EN ISO 527-2
    Tensile strength57MPa50 mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (flexural test)
    2070MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength19/34/78MPa1% / 2% / 5%EN ISO 604
    Compression modulus1300MPa5mm/minEN ISO 604
    Impact strength (Charpy)96kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Notched impact strength (Charpy)11kJ/m2max. 7,5JDIN EN ISO 179-1eA
    Ball indentation hardness141MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParamsNorm
    Glass transition temperature151CDIN EN ISO 11357
    Service temperature110Cshort term-
    Service temperature85Clong term-
    Thermal expansion (CLTE)8,110-5*1/K23-60°C, longitudinalDIN EN ISO 11359-1;2
    Thermal expansion (CLTE)8,110-5*1/K23-100°C, longitudinalDIN EN ISO 11359-1;2
  • Other properties
    Other propertiesValueUnitParamsNorm
    Flammability800CGlow Wire Ignitability Temp, 3.0 mm-
    Flammability775CGlow Wire Ignitability Temp, 2.0 mm-
    Flammability775CGlow Wire Ignitability Temp, 1.5 mm-
    Flammability775CGlow Wire Ignitability Temp, 1.0 mm-
    Flammability (UL94)V0--
    Flammability1.0mmGlow Wire Flammability Index 960°C passes @-
    Flammability+-60 sec. Vertical Bunsen Burner test FAR 25.853 Appx F, Prt 1, (a), 1, (Air)FAR 25.853
    Flammability+-FAR 25.853 Appx F, Prt 1, (a), 1, (Air)FAR 25.853
    Flammability+-FAR 25.853 Appx F, Prt 1, (a), 1, (Air)-
    Flammability~15-ASTM E 162 (rail)-
    Flammability11-13-ASTM E 662 (Air/Rail)-
    Flammability20-40-ASTM E 662 (Air/Rail)-
    Water absorption0.09/0.15%24h / 96h (23°C)DIN EN ISO 62

Stock program