TECAPEEK IM GF30 natural

injection moulded PEEK with 30% glass fibre

Injection moulded stock shapes of a Victrex PEEK polymer, and 30% glass fibre are available under the tradename TECAPEEK IM GF30 natural. This modification provides increased strength and rigidity. The outer diameter of tubes made from this glass fibre reinforced PEEK vary between 31,75 mm to 177,8 mm, the inner diameter varies from 12,7 to 152,4 mm. Lengths of 76,2 and 152,4 mm are the standard.

Facts:

Chemical Designation:
PEEK (Polyetheretherketone)
Colour:
beige
Density:
1,51 g/cm3

Main Features:

  • high dimensional stability
  • very good chemical resistance
  • inherent flame retardant
  • good heat deflection temperature
  • hydrolysis and superheated steam resistant
  • good machinability
  • very high creep resistant

Target Industries:

Downloads:

Technical Details


  • Mechanical properties
    Mechanical propertiesValueUnitParamsNorm
    Ball indentation hardness87.5-ASTM D 2240
    Tensile strength180MPa50mm/minASTM D 638
    Modulus of elasticity
    (flexural test)
    11000MPa2mm/min, 10 NASTM D 790
    Elongation at break2.8%50 mm/minASTM D 638
  • Thermal properties
    Thermal propertiesValueUnitParamsNorm
    Melting temperature341CDIN EN ISO 11357
    Glass transition temperature150CDIN EN ISO 11357
    Service temperature300Cshort term-
    Service temperature300Clong term-

Stock program