TECASINT 2031 black

Polyimide with 40 % graphite

Starting with the base polymer TECASINT 2011, TECASINT 2031 with 40 % graphite has been developed. The plastic has high resistance to thermal ageing and improved self lubrication. This is accompanied by minimised thermal elongation for dimensionally stable components and increased creep strength.

Facts:

Chemical Designation:
PI (Polyimide)
Colour:
anthracite
Density:
1,59 g/cm3

Main Features:

  • very high creep resistant
  • very good thermal stability
  • good wear resistance
  • high thermal and mechanical capacity
  • very good slide and wear properties
  • low thermal expansion
  • resistance against high energy radiation
  • sensitive to hydrolysis in higher thermal range

Target Industries:

Downloads:

Technical Details


  • Mechanical properties
    Mechanical propertiesValueUnitParamsNorm
    Notched impact strength (Charpy)3.3kJ/m2max 7.5 J, 23°CDIN EN ISO 179-1
    Impact strength (Charpy)14.2kJ/m2max 7.5 J, 23°CDIN EN ISO 179-1
    Shore hardness82-Shore D, 23°C-
    Tensile strength52MPa50 mm/min, 23°CDIN EN ISO 527-1
    Elongation at break1.8%50 mm/min, 23°CDIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    5100MPa1 mm/min, 23°CDIN EN ISO 527-1
    Flexural strength87MPa10 mm/min, 23°CDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    4800MPa2 mm/min, 23°CDIN EN ISO 178
    Compression strength125MPa10 mm/min, 23°CEN ISO 604
    Compression modulus1800MPa1 mm/min, 23°CEN ISO 604
    Elongation at break2.0%10 mm/min, 23°CDIN EN ISO 178
    Compression strength120MPa10mm/min, 10% strain, 23°CEN ISO 604
    Compressive strain at break12.5%10 mm/min, 23°CEN ISO 604
  • Thermal properties
    Thermal propertiesValueUnitParamsNorm
    Glass transition temperature355C-
    Heat distortion temperature325C1.8 MPaDIN 53 461
    Service temperature-Clong-term-
    Thermal expansion (CLTE)10-5*1/K50-200°CDIN 53 752
    Thermal expansion (CLTE)10-5*1/K200-300°CDIN 53 752
  • Other properties
    Other propertiesValueUnitParamsNorm
    Flammability (UL94)V0-corresponding toDIN IEC 60695-11-10;
    Water absorption1.2%24 h in water, 23°CDIN EN ISO 62
    Water absorption2.2%24 h in water, 80°CDIN EN ISO 62

Stock program