TECAST L natural

PA 6 C oil filled

TECAST L is an oil-filled cast nylon type 6 used in applications that require excellent bearing and wear properties, and where external lubrication is difficult or impractical. TECAST L has excellent wear and abrasion resistance, which results in extended component life and lower maintenance cost. TECAST L is also available in yellow and black.

Facts:

Chemical Designation:
PA 6 C (Cast polyamide 6)
Colour:
ivory
Alternative colours available
blackyellow
Density:
1,13 g/cm3

Main Features:

  • good slide and wear properties
  • good wear properties
  • high toughness
  • electrically insulating
  • resistant to many oils, greases and fuels
  • high strength

Target Industries:

Technical Details


  • Mechanical properties
    Mechanical propertiesValueUnitParamsNorm
    Modulus of elasticity
    (tensile test)
    2900MPa1mm/minDIN EN ISO 527-2
    Tensile strength69MPa50mm/minDIN EN ISO 527-2
    Tensile strength at yield66MPa50mm/minDIN EN ISO 527-2
    Elongation at yield8%50mm/minDIN EN ISO 527-2
    Elongation at break50%50mm/minDIN EN ISO 527-2
    Flexural strength95MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    2900MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength19/35/76MPa1% / 2% / 5%EN ISO 604
    Compression modulus2700MPa5mm/min, 10 NEN ISO 604
    Impact strength (Charpy)n.b.kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Notched impact strength (Charpy)5kJ/m2max. 7,5JDIN EN ISO 179-1eA
    Ball indentation hardness150MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParamsNorm
    Glass transition temperature48CDIN EN ISO 11357
    Melting temperature218CDIN EN ISO 11357
    Service temperature170Cshort termNN
    Service temperature100Clong termNN
    Thermal expansion (CLTE)1310-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)1310-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal conductivity0.37W/(k*m)ISO 22007-4:2008
    Specific heat1.7J/(g*K)ISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitParamsNorm
    surface resistivity1014ODIN IEC 60093
    volume resistivity1014O*cmDIN IEC 60093
  • Other properties
    Other propertiesValueUnitParamsNorm
    Resistance to hot water/ bases(+)--
    Flammability (UL94)HB-corresponding toDIN IEC 60695-11-10;
    Resistance to weathering---
    Water absorption0.4%24h / 96h (23°C)DIN EN ISO 62

Stock program