>

01/03/2024

insulbar® UK Celebrates 20 Years CAB Membership

Ensinger insulbar® UK proudly marks two decades of collaboration with the Council for Aluminium in Building (CAB).

22/02/2024

SBTi has approved net-zero science-based target by 2046

Ensinger announced that the Science Based Targets initiative has approved Ensinger’s net-zero science-based target by 2046. The net-zero target is to achieve ....

22/11/2023

More than 20 million rotations

Ensinger Sintimid is launching a new high-performance plastic named TECASINT 8591 for tribological applications in the space industry.

30/05/2023

Sadness at the death of Wilfried Ensinger

Wilfried Ensinger passed away on 23 May at the age of 87. The employees of the Ensinger Group mourn together

09/03/2023

Pioneer in energy efficiency and the circular economy

Ensinger to present its innovative profile range at BAU 2023

03/02/2023

Change to the Management Board

A change is taking place within Ensinger’s top management ...

14/07/2022

Ensinger receives "Annual Supplier Award" from Reynaers Aluminium

Ensinger has received the first-ever "Annual Supplier Award" from Reynaers Aluminium in the sustainability category.

31/05/2022

Ensinger receives Schaeffler Supplier Award

Ensinger is one of this year's winners of the Schaeffler Supplier Award. In Herzogenaurach, Ensinger received the award in the "Innovation" category ...

11/05/2022

Two new Heads of Division at Ensinger

Sylvia Mücke is in charge of the “Special Products” division, Edith Schneider is heading up Machined Parts ...

21/04/2022

Compound for detectable injection-moulded components

Ensinger is launching a new detectable compound. The POM-C material has been specially developed for injection-moulded components ...

11/03/2022

Ensinger cancels participation at the K Fair due to the Corona pandemic

The K trade fair is the most important trade fair for the plastics industry ...

24/02/2022

Ensinger sets itself ambitious climate protection goals

Ensinger is taking its responsibility for climate protection seriously and sets itself ambitious goals.

01/02/2022

Ensinger acquires the StyLight® thermoplastic composite business from INEOS Styrolution

Ensinger and INEOS Styrolution announced the joint agreement today that Ensinger has acquired the StyLight® thermoplastic composite materials business of INEOS Styrolution. 

04/10/2021

Ensinger now also manufactures organosheets

Ensinger is expanding its portfolio in the field of thermoplastic composite materials. A double-belt press (DBP) was recently put into operation at  ...

21/09/2021

Ensinger sells its subsidiary Tecarim

Plastics processor Ensinger GmbH, Nufringen, has sold its Tecarim business. Ortwin Knaipp, together with a business partner, has acquired the machinery and equipment.

28/07/2021

Polymer expertise in the fight against COVID-19

To boost vaccine production, Solvay, Ensinger and optek are safeguarding the value-added chain with precision components.

22/07/2021

Ensinger presents climate strategy

The manufacturing sector – particularly the plastics industry – has a key part to play in curbing climate change. With this in mind, the Ensinger Group’s owners ...

20/05/2021

Ensinger Machined Parts achieves SC21 Bronze Award for a consecutive year.

Ensinger Machined Parts are pleased to announce its Bridgwater UK facility has been awarded Bronze in the Supply Chains for the 21st Century (SC21) programme, for the second year running. 

23/04/2021

In-house polymer powder production

Plastics processor Ensinger is expanding its manufacturing capacities for composites. Thanks to a polymer pulveriser machine that wasrecently commissioned

22/01/2021

Ensinger UK announces rebranding of its Machined Parts business

Ensinger formally changed the trading name of Trig Engineering Ltd to Ensinger Machined Parts Ltd. Ensinger also announces that on the 1st of April 2021, Ensinger Machined Parts Ltd will acquire via merger the trade and assets of EPE Ltd, trading as Ensinger Machined Parts Ltd.

20/01/2021

Improving the performance of lithium batteries

High-temperature polyimide TECAPOWDER P84 enhances the electrochemical properties.

01/10/2020

Thermoplastic composites: Ensinger commissions new prepreg facility

The Ensinger Group has invested further in the field of composite materials; at the Cham site (Bavaria), a new facility has been commissioned for the production of thermoplastic prepregs.

22/06/2020

Material for high-frequency applications

Ensinger is presenting a new compound for laser direct structuring (LDS): TECACOMP LCP LDS 1049426 black, based on a Liquid Crystal Polymer (LCP), is designed for thin-walled 3D MID components with very fine conductor paths.

20/09/2019

Ensinger - Apprenticeship Awards Cymru Finalists

Ensinger UK has been chosen as finalists for the Apprenticeship Awards Cymru in the Medium Employer category.

18/07/2019

Ensinger expands its Management Board

Dr. Oliver Frey was appointed Managing Director of Ensinger GmbH and the Ensinger Group on 1 July 2019, in addition to the long-standing Managing Directors Klaus Ensinger and Dr. Roland Reber.

24/01/2019

Ensinger acquires medical technology specialist Moll Engineering

Plastics processor Ensinger GmbH, Nufringen, has taken over the medical technology manufacturer Moll Engineering GmbH. The owner-operated company based in Lübeck manufactures products from carbon fibre-reinforced high-performance plastics, stainless steel and titanium.

20/09/2018

Ensinger presents new laser markable engineering plastics

In the food-processing and pharmaceutical industries, the labelling of machine components with the aid of UV marking lasers is, in many places, standard practice. The plastics processor Ensinger has now expanded its portfolio to include a stock shape that can be labelled with a laser.

03/09/2018

Ensinger UK 30th anniversary summer party

On July 14th, Ensinger UK held a spectacular summer party at its UK head office to celebrate its 30th anniversary, and to show appreciation to its employees for their hard work and contribution to the company's success. 

21/06/2018

Ensinger UK invests in machining

The latest investment in Ensinger’s machine shop is the Mazak i200s, one of the most advanced multi-tasking machining tools on the market today.

14/06/2018

Ensinger Apprentice School

Ensinger UK Machined Parts has invested in state of the art apprentice schools at their two machining facilities in order to tackle the urgent need for skilled engineers. 

03/05/2018

Polyketone: Compounds to meet mechanical, tribological and chemical demands

Ensinger TECACOMP PK TRM compounds for a wide range of applications. The tribologically optimised Ensinger compounds based on aliphatic polyketone stand out for their versatility: the polymer is very tough, has a high chemical resistance and also good sliding and tribological behaviour – even when paired with the same kind of material.

13/04/2018

Ensinger to expand its Cham site

Ensinger is about to make a further investment at its Cham site. The plastics processor is planning to extend a production and logistics building that was put into operation ten years ago. These new building plans are the second construction project in the branch factory. A few weeks ago, Ensinger began the construction of a hall which, in the future, will house the compounding lines and parts of the logistics facilities.

10/04/2018

Maximum safety coupled with low weight

Ensinger to highlight innovative thermoplastics at the Aircraft Interiors Expo 2018. The “Aircraft Interiors Expo” in Hamburg is the world’s leading platform for cabin interior products and services (April 10-12, Hamburg Messe). Ensinger will present a wide spectrum of modified thermoplastics, including the new flame retardant materials TECAMID 6 (PA 6) FRT, TECAMID 66 GF15 FRT and TECANYL (PPE) VH2.

22/03/2018

PEEK: Ensinger extends its hollow rod portfolio

New online tool makes selection easier. Polyether ether ketone (PEEK) is a sought-after material for demanding technical applications. Ensinger uses the high-performance plastic to produce, among other things, hollow rods, tubes and rings, which come in an increasing number of variations.

10/07/2017

"Aluminum systems more energy efficient than wood"

Ensinger celebrates insulbar insulating profiles with a major order from Western Windows Systems for North America.

07/07/2017

In mourning for Martha Ensinger

Martha Ensinger, beloved wife of company founder Wilfried Ensinger, passed away on June 27 after a serious illness. The Chief Executive and employees of Ensinger share the grief of the family members at this sad time.

01/06/2017

Ensinger opens a location in South Korea

Sales Office and Stock Shapes Warehouse Established. The Ensinger Korea Ltd subsidiary, which was founded this year, is based in Ilsan near Seoul.

15/05/2017

Ensinger acquires Swiss composite specialist "next composites"

Finished parts from carbon reinforced thermoplastics open up a new business field. Ensinger GmbH in Nufringen has taken over Swiss plastics processing company next composites GmbH.

11/04/2017

Wilfried Ensinger is awarded the Gold Medal of the Town of Rottenburg

The Town of Rottenburg has recognized Wilfried Ensinger for his outstanding social commitment. At the town's annual reception, the founder and long-standing Managing Director of Ensinger GmbH was awarded the town’s highest accolade, its gold medal, by the Mayor Stephan Neher. 

22/03/2017

Aircraft Interiors - April 4-6, Hamburg

At the "Aircraft Interiors Expo" (April 4-6, Hamburg), Ensinger will show a broad spectrum of applications for the aerospace industry. The annual trade fair is the most important global suppliers’ platform for products and services related to cabin interior equipment. 

21/03/2017

insulbar receives Cradle to Cradle Material Health Certificates

Ensinger's thermal insulation profiles for metal frameworks of windows, doors and façades not only increase the energy efficiency of buildings. They also meet highest sustainability standards: tested according to the demanding criteria of the Cradle to Cradle Products Innovation Institute, insulbar was awarded with a Material Health Certificate at the silver level for the variant ESP.

18/10/2016

K 2016: Ensinger showcases its work in additive manufacturing

Wide spectrum of high-performance plastics for FFF

27/09/2016

K 2016: EMI compounds developed by Ensinger

Plastic housings made from shielding compounds provide protection against electromagnetic interference (EMI)

22/06/2016

Ensinger celebrates 50th company anniversary

Berthold Leibinger and Former German President Horst Köhler emphasize the importance of medium-sized Enterprises

07/04/2016

Polyamide stock shapes: Automatic manufacture and quality testing

Fast, flexible custom casting made to order

24/11/2015

Once again premium - Schaeffler and Continental honour Ensinger

For the third time in a row, automotive industry suppliers Schaeffler and Continental have awarded Ensinger’s injection moulding division the honour of “premium supplier”.

20/11/2015

News channel picks Ensinger as "Hidden Champion 2015"

The German news channel n-tv picked out, for what is now the fifth time, the hidden champions among Germany's small- and medium-sized companies.

19/10/2015

Opening ceremony: New site in Seewalchen am Attersee

Ensinger has moved the head office of its Austrian subsidiary from Lenzing to Seewalchen am Attersee.

06/09/2015

Engineering plastics for harsh environments: Ensinger introduces TECAPEEK SM Spin Molded Tubes

Ensinger has announced the extension of its high performance, high temperature TECAPEEK product line, with the introduction of TECAPEEK SM Spin Molded Tubes.

03/09/2015

Oil & Gas: High-performance plastics TECAPEEK first to comply both with EN ISO 23936-1 and NORSOK M-710 Standards

Ensinger announces that semi-finished products made with VICTREX® PEEK polyetheretherketone resin are the first to achieve compliance for use in highly demanding oil and gas applications according to EN ISO 23936-1:2009 as well as NORSOK M-710, Edition 3.

22/01/2015

insulbar RE gets the green light from Wicona and Ensinger

Aluminium systems for windows, doors and facades are now already being fitted for the first time with thermal insulating bars made of recycled polyamide