TECAPEEK ID blue

PEEK blue inductively detectable

TECAPEEK ID blue is a metal detectable PEEK made with Victrex® PEEK polymer. This PEEK has been modified with a detectable filler designed to increase detectability in food and pharmaceutical processes. The material is sensitive enough to allow for the easy detection of small particulates using standard metal detection methods. It is also visble to those systems that rely on optical inspection equipment due to the addition of blue colored pigment. All additives are suitable for food contact.

Compliances

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
blue grey
Alternative colours available

Density
1,49 g/cm3

Main Features

  • detectable via metal detector
  • good chemical resistance
  • high creep resistance
  • good heat deflection temperature
  • inherent flame retardant
  • hydrolysis and superheated steam resistant
  • good machinability

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Modulus of elasticity
    (tensile test)
    4600MPa1mm/minDIN EN ISO 527-2
    Tensile strength111MPa50mm/minDIN EN ISO 527-2
    Tensile strength at yield111MPa50mm/minDIN EN ISO 527-2
    Elongation at yield4%50mm/minDIN EN ISO 527-2
    Elongation at break6%50mm/minDIN EN ISO 527-2
    Flexural strength166MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3700MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength25/46/106MPa1% / 2% / 5%EN ISO 604
    Compression modulus4800MPa5mm/min, 10 NEN ISO 604
    Impact strength (Charpy)72kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Ball indentation hardness260MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Glass transition temperature150CDIN EN ISO 11357
    Melting temperature341CDIN EN ISO 11357
    Service temperature300Cshort termNN
    Service temperature260Clong termNN
    Thermal expansion (CLTE)510-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)510-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal conductivity0.27W/(k*m)ISO 22007-4:2008
    Specific heat1.1J/(g*K)ISO 22007-4:2008
    Thermal expansion (CLTE)710-5*1/K100-150°C, long.DIN EN ISO 11359-1;2
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    Specific surface resistance1014ODIN IEC 60093
    Specific volume resistance1014O*cmDIN IEC 60093
  • Other properties
    Other propertiesValueUnitParameterNorm
    Resistance to hot water/ bases+--
    Flammability (UL94)V0-corresponding toDIN IEC 60695-11-10;
    Resistance to weathering---
    Water absorption0.03%24h / 96h (23°C)DIN EN ISO 62

Stock program