TECAPEEK CM XP99 black

compression molded 7% grapite, 8% PTFE and 15% carbon fiber reinforced PEEK

add to list
product inquiry
request sample
TECAPEEK CM XP99 black is a compression-molded bearing grade PEEK material that has been modified with 7% graphite, 8% PTFE and 15% carbon fibers. The plastic is produced in plates, rods and tubes and is available in many dimensions on request. Compared to extrusion, the compression molding process has the advantage of no minimum run quantity. 

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
black
Density
1.45 g/cm3

Main Features

  • excellent strength
  • excellent wear properties
  • hydrolysis and superheated steam resistant
  • broad chemical compatibility
  • good dimensional stability
  • high stiffness

Target industries

oil and gas industry
mechanical engineering
chemical and refinery industry

Downloads

Datasheet (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 9,700 psi @73°F ASTM D 790
    Elongation at break (tensile test) 1.4 % @73°F DIN EN ISO 527-1
    Flexural strength 14,760 psi @73°F ASTM D 790
    Modulus of elasticity
    (flexural test)    		 1,100,000 psi @73°F ASTM D 790
    Impact strength (Izod) 0.60 ftlbsin @73°F ASTM D 256
    Compression strength 21,200 psi @ 73°F ASTM D 695
    Compression modulus 500,000 psi @ 73°F ASTM D 695
    Shore hardness 88 D @ 73°F; Mscale ASTM D 2240
    Shear strength 10,300 psi @ 73°F -
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Melting temperature 649 F -
    Heat distortion temperature >455 F ASTM D 648
    Glass transition temperature 289 F -
  • product-technical-detail-collapse-item-2-lvl-1
    Other properties Value Unit Parameter Norm
    Water absorption 0.07 % @73 F, 24 hr *** new ***