TECASINT 2011 natural

unfilled polyimide

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Facts

Chemical designation
PI (Polyimide)
Colour
brown
Alternative colours available

Density
1,38 g/cm3

Main Features

  • very good thermal stability
  • high thermal and mechanical capacity
  • low outgassing
  • very good electrical insulation
  • resistance against high energy radiation
  • good chemical resistance
  • high creep resistance
  • sensitive to hydrolysis in higher thermal range

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Notched impact strength (Charpy)9.3kJ/m2max 7.5 J, 23°CDIN EN ISO 179-1
    Impact strength (Charpy)87.9kJ/m2max 7.5 J, 23°CDIN EN ISO 179-1
    Shore hardness90-Shore D, 23°C-
    Tensile strength130MPa50 mm/min, 23°CDIN EN ISO 527-1
    Elongation at break7.0%50 mm/min, 23°CDIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    3600MPa1 mm/min, 23°CDIN EN ISO 527-1
    Flexural strength177MPa10 mm/min, 23°CDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3600MPa2 mm/min, 23°CDIN EN ISO 178
    Compression strength470MPa10 mm/min, 23°CEN ISO 604
    Compression modulus1713MPa1 mm/min, 23°CEN ISO 604
    Elongation at break8.0%10 mm/min, 23°CDIN EN ISO 178
    Compression strength170MPa10mm/min, 10% strain, 23°CEN ISO 604
    Compressive strain at break55%10 mm/min, 23°CEN ISO 604
    Ball indentation hardness260MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Glass transition temperature352C-
    Heat distortion temperature319C1.80 MPaDIN 53 461
    Service temperature-Clong-term-
    Thermal expansion (CLTE)4.310-5*1/K50-200°CDIN 53 752
    Thermal expansion (CLTE)5.110-5*1/K200-300°CDIN 53 752
    Specific heat0.925J/(g*K)-
    Thermal conductivity0.22W/(k*m)40°CISO 8302
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    surface resistivity1015O23°CDIN IEC 60093
    volume resistivity1015O*cm23°CDIN IEC 60093
    Dielectric constant4.2-100 Hz, 23°CDIN IEC 60250
    Dielectric constant4.2-1 kHz, 23°CDIN IEC 60250
    Dielectric constant4.1-10 kHz, 23°CDIN IEC 60250
    Dielectric constant4.1-100 kHz, 23°CDIN IEC 60250
    Electric strength DC21.8kV*mm-123°CISO 60243-1
  • Other properties
    Other propertiesValueUnitParameterNorm
    Water absorption0.47%24 h in water, 23°CDIN EN ISO 62
    Water absorption1.65%24 h in water, 80°CDIN EN ISO 62
    Flammability (UL94)V0-corresponding toDIN IEC 60695-11-10;

Stock program