TECAMID 6 MO black

PA 6 MO black

The addition of molybdenum disulphide (MoS2) to PA6 results in an increase of rigidity, hardness and dimensional stability due to its nucleating effect. Conversely, the material's impact strength is reduced as a result. The additive also lends this modified polyamide material improved sliding friction properties and abrasion resistance. Due to its black colour, this universal grade PA 6 is well suited for outdoor use and offers improved UV resistance.

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
black
Alternative colours available

Density
1,14 g/cm3

Main Features

  • good slide and wear properties
  • high strength
  • good wear properties
  • high toughness
  • resistant to many oils, greases and fuels
  • improved surface hardness

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Tensile strength at yield82MPa50mm/minDIN EN ISO 527-2
    Elongation at break37%50mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    3300MPa1mm/minDIN EN ISO 527-2
    Ball indentation hardness160MPaISO 2039-1
    Impact strength (Charpy)n.b.kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Tensile strength84MPa50mm/minDIN EN ISO 527-2
    Elongation at yield5%50mm/minDIN EN ISO 527-2
    Flexural strength110MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3100MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength17/32/79MPa1% / 2% / 5%EN ISO 604
    Compression modulus2900MPa5mm/min, 10 NEN ISO 604
    Notched impact strength (Charpy)5kJ/m2max. 7,5JDIN EN ISO 179-1eA
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Glass transition temperature51CDIN EN ISO 11357
    Service temperature160Cshort termNN
    Service temperature100Clong termNN
    Thermal expansion (CLTE)810-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)810-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Melting temperature220CDIN EN ISO 11357
    Thermal conductivity0.37W/(k*m)ISO 22007-4:2008
    Specific heat1.6J/(g*K)ISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    Specific volume resistance1014O*cmSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    Specific surface resistance1014OSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    Dielectric strength30kV/mm23°C, 50% r.h.ISO 60243-1
    Resistance to tracking (CTI)600VPlatin electrode, 23°C, 50% r.h., solvent ADIN EN 60112
  • Other properties
    Other propertiesValueUnitParameterNorm
    Water absorption0.6%24h / 96h (23°C)DIN EN ISO 62
    Flammability (UL94)HB-corresponding toDIN IEC 60695-11-10;
    Resistance to hot water/ bases(+)--
    Resistance to weathering(+)-NN

Stock program