TECATRON® PPS natural

PPS unfilled

Polyphenylenesulphide (PPS) - TECATRON - is a semi crystalline, high temperature thermoplastic. Due to its chemical structure, PPS is a very resistant polymer with high mechanical strength and rigidity, even at temperatures above 392°F. In addition to the low water absorption, PPS also shows good dimensional stability, low tendency to creep and excellent electrical properties, and is thus well suited for parts with tightest tolerances. Furthermore, unfilled PPS is very chemically stable, even at high temperatures, but does show sensitivity to UV radiation when uncolored. There is no known solvent that dissolves TECATRON PPS at temperatures below 392°F.

Compliances

Facts

Chemical designation
PPS (Polyphenylensulfide)
Color
natural
Density
1,36 g/cm3

Main Features

  • high purity
  • very good chemical resistance
  • good heat deflection temperature
  • high creep resistance
  • high strength
  • high dimensional stability
  • resistance against high energy radiation

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitConditionTest Method
    Tensile strength at yield13,700psi@ 73 °FASTM D 638
    Modulus of elasticity
    (tensile test)
    836,700psi@ 73 °FASTM D 638
    Elongation at break2.5%@ 73 °FASTM D 638
    Flexural strength20,400psi@ 73 °FASTM D 790
    Modulus of elasticity
    (flexural test)
    631,100psi@ 73 °FASTM D 790
    Impact strength (Izod)0.62ftlbsin@ 73 °FASTM D 256
    Rockwell hardness105-@ 73 °FASTM D 785
    Coefficient of friction0.24-Dynamic, 40 psi, 50 fpmASTM D 3702
    Wear (K) factor540*10-10in3minftlbshrAgainst Steel, 40 psi, 50 fpmASTM D 3702
    Compression strength19,000psi@ 10% strainASTM D 695
    Compression modulus400,000psiASTM D 695
    Rockwell hardness124-R ScaleASTM D 785
  • Thermal properties
    Thermal propertiesValueUnitConditionTest Method
    Deflection temperature400F@ 66 psiASTM D 648
    Deflection temperature220F@264 psiASTM D 648
    Thermal expansion (CLTE)3.3*10^-5 in/in / degre72 F - 140 FASTM D 696
    Service temperature338FLong Term-
    Thermal conductivity2.08BTU-in/hr-ft^2 - degISO 22007-4:2008
    Melting temperature536F-
    Service temperature500FIntermittent-
    Specific heat0.239butlbfISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitConditionTest Method
    surface resistivity1.0*1015ODIN IEC 60093
    Dielectric constant3.0-@ 1 KHz, 73 °F, 50% RHASTM D 150
    Dissipation factor.0001-@ 1 KHz, 73 °FASTM D 150
    Dielectric strength450V/milASTM D 149
  • Other properties
    Other propertiesValueUnitConditionTest Method
    Moisture absorption0.01%@ 24 hrs, 73 °FASTM D 570
    Flammability (UL94)V0-DIN IEC 60695-11-10;

Stock program