Thermoplastic organosheets set new standards and offer a wide range of applications in numerous industries. Our organosheets are high-performance, continuous fibre-reinforced composites made of carbon or glass fibre fabric embedded in a thermoplastic matrix. They offer benefits such as excellent mechanical properties, low density, easy thermoformability and recyclability: depending on material, part design, purity of material fractions and available recycling infrastructure, the components can be mechanically reprocessed.
The multilayer, fully impregnated and consolidated organosheets are manufactured at Ensinger on a double belt press from prepreg or semipeg material, whereby the components used can be individually adapted to the application.
Organosheets basically consist of several layers of thermoplastic prepreg or semipreg material which are stacked and then pressed into a sheet with a thickness of up to 5 mm. On request, the organosheets can also be produced according to individual specifications regarding fibre orientation or layer thickness.
All our prepreg and semipreg materials can be further processed into organosheets. Thanks to Ensinger's own compounding, we can offer special blends and compounds in addition to the standard materials and adapt all matrix and fibre combinations as well as fibre architectures individually to your application. The choice of matrix material is diverse: the matrix materials can range from technical polymers such as polyamides to high-performance plastics such as PEI, PEEK and PEKK. High-quality materials such as polycarbonate and SAN are also available for visual applications.
The organosheets are supplied as standard in sheets of 1,20 m width. The length of the sheets can be individually defined depending on the application. For some materials, widths of up to 1,70 m are possible.
Organosheets are suitable for numerous applications due to their beneficial properties. Depending on material, part design, purity of material fractions, and available recycling infrastructure, organosheets made from selected materials can be mechanically reprocessed.
In fast processes such as thermoforming and overmoulding, organosheets can be used to produce cost-effective components in large quantities, also in high visual quality. In thermoforming, an organosheet is heated by radiant heaters to above the melting point of the polymer and formed into the part by special moulds. Thermoforming offers several advantages:
Thermoforming can be used for organosheets with a thickness of up to 5 mm.
Organosheets can also be further processed in the overmoulding process. In this process, the thermoplastic composite laminate is first thermoformed and then overmoulded in an injection moulding process. Overmoulding is particularly suitable for the production of parts with complex structures and allows for:
