TECACOMP PEEK GF10 natural 1077739

PEEK Compound 10% glass fibre reinforced – balanced strength & toughness

add to list
product enquiry
request sample

TECACOMP PEEK GF10 natural is a glass fibre reinforced PEEK compound containing 10 % glass fibre. It is optimised for injection moulding and offers a balanced combination of strength, toughness, and dimensional stability while maintaining excellent processability. Compared to higher fibre contents (e.g., GF30), its mechanical properties – especially tensile strength, modulus, and stiffness – are lower, making it ideal for applications requiring moderate rigidity and impact resistance.

Compliances

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
natural
Density
1.36 g/cm3

Main Features

  • moderate stiffness
  • high strength
  • good heat deflection temperature
  • high creep resistance
  • very good chemical resistance
  • hydrolysis and superheated steam resistant
  • for injection moulding

Target industries

mechanical engineering
chemical technology
automotive industry
vacuum technology

Downloads

Datasheet (PDF)
Product handling (PDF)
PCF Statement (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 128 MPa DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)    		 6100 MPa DIN EN ISO 527-1
    Elongation at break (tensile test) 3,5 % DIN EN ISO 527-1
    Impact strength (Charpy) 48 kJ/m2 DIN EN ISO 179-1eU
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 143 C -
    Melting temperature 343 C -
    Service temperature 300 C short term -
    Service temperature 260 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω DIN EN 61340-2-3
    volume resistivity 1013 Ω*cm DIN EN 61340-2-3
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Molding shrinkage 1,0 % longitudinal DIN EN ISO 294-4
    Molding shrinkage 1,3 % transverse DIN EN ISO 294-4
  • product-technical-detail-collapse-item-4-lvl-1
    Processing parameter Value Unit Parameter Norm
    processing temperatures 360 - 400 C -
    Mould temperature 160 - 210 C -
  • product-technical-detail-collapse-item-5-lvl-1
    Predrying Value Unit Parameter Norm
    Permissible residual moisture content 0,1 % -
    Drying temperature 120 - 140 C -
    Drying time 4 h -