TECAMID 6 MO black

PA 6 MO black

add to list
product enquiry
request sample
The addition of molybdenum disulphide (MoS2) to PA6 results in an increase of rigidity, hardness and dimensional stability due to its nucleating effect. Conversely, the material's impact strength is reduced as a result. The additive also lends this modified polyamide material improved sliding friction properties and abrasion resistance. Due to its black colour, this universal grade PA 6 is well suited for outdoor use and offers improved UV resistance.

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
black
Density
1.14 g/cm3

Main Features

  • good slide and wear properties
  • high strength
  • good wear properties
  • high toughness
  • resistant to many oils, greases and fuels
  • improved surface hardness

Target industries

mechanical engineering
automotive industry

Downloads

Datasheet (PDF)
Product handling (PDF)

Technical details

  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Modulus of elasticity
    (tensile test)    		 3300 MPa 1mm/min DIN EN ISO 527-2
    Tensile strength 84 MPa 50mm/min DIN EN ISO 527-2
    Tensile strength at yield 82 MPa 50mm/min DIN EN ISO 527-2
    Elongation at yield (tensile test) 5 % 50mm/min DIN EN ISO 527-2
    Elongation at break (tensile test) 37 % 50mm/min DIN EN ISO 527-2
    Flexural strength 110 MPa 2mm/min, 10 N DIN EN ISO 178
    Modulus of elasticity
    (flexural test)    		 3100 MPa 2mm/min, 10 N DIN EN ISO 178
    Compression modulus 2900 MPa 5mm/min, 10 N EN ISO 604
    Compression strength 17/32/79 MPa 1% / 2% / 5% EN ISO 604
    Impact strength (Charpy) n.b. kJ/m2 max. 7,5J DIN EN ISO 179-1eU
    Notched impact strength (Charpy) 5 kJ/m2 max. 7,5J DIN EN ISO 179-1eA
    Shore hardness 79 D DIN EN ISO 868
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 51 C DIN EN ISO 11357
    Melting temperature 220 C DIN EN ISO 11357
    Thermal conductivity 0.37 W/(k*m) ISO 22007-4:2008
    Specific heat 1.6 J/(g*K) ISO 22007-4:2008
    Service temperature 160 C short term NN
    Service temperature 100 C long term NN
    Thermal expansion (CLTE) 8 10-5*1/K 23-60°C, long. DIN EN ISO 11359-1;2
    Thermal expansion (CLTE) 8 10-5*1/K 23-100°C, long. DIN EN ISO 11359-1;2
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1014 Ω Silver electrode, 23°C, 12% r.h. -
    volume resistivity 1014 Ω*cm Silver electrode, 23°C, 12% r.h. -
    Dielectric strength 30 kV/mm 23°C, 50% r.h. ISO 60243-1
    Resistance to tracking (CTI) 600 V Platin electrode, 23°C, 50% r.h., solvent A DIN EN 60112
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Resistance to hot water/ bases (+) - -
    Flammability (UL94) HB - corresponding to DIN IEC 60695-11-10;
    Resistance to weathering (+) - NN
    Water absorption 0.3 - 0.6 % 24h / 96h (23°C) DIN EN ISO 62
  • product-technical-detail-collapse-item-4-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €

Stock program