TECAMID® 66 GF30 black

PA 66 filled with 30% glass fibers

PA66 GF30 is a 30 % glass fiber reinforced PA 66. It demonstrates outstanding mechanical properties such as higher strength, rigidity, creep strength and dimensional stability. Compared to unreinforced PA 66, the properties of this glass filled modification GF30 make this material suitable for use in parts that are exposed to high static loads over long periods in high temperature conditions. As glass fibers tend in some cases to have a marked abrasive effect on mating surfaces, Nylon 66 GF30 is less suitable for sliding applications. Due to its black color additives, black Nylon 66 GF30 shows improved UV protection for outdoor weather resistance applications. Ensinger manufactures PA66 GF30 under the trade name TECAMID 66 GF 30 black.

Facts

Chemical designation
PA 66 (Polyamide 66)
Color
black
Alternative colors available
grey-white
Density
1.36 g/cm3

Main Features

  • very good mechanical strength
  • high heat deflection temperature
  • high stiffness
  • high strength
  • excellent wear properties
  • high fatigue strength
  • resistant to many solvents
  • high creep resistance

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Condition Test Method
    Tensile strength at yield 12,200 psi @ 73 °F ASTM D 638
    Elongation at break (tensile test) 10 % @ 73 °F ASTM D 638
    Modulus of elasticity
    (tensile test)
    600,000 psi @ 73 °F ASTM D 638
    Flexural strength 19,575 psi @ 73 °F ASTM D 790
    Modulus of elasticity
    (flexural test)
    700,000 psi @ 73 °F ASTM D 790
    Compression strength 4,300 psi @ 73 °F, 1% strain ASTM D 695
    Compression strength 17,000 psi @ 73 °F, 10% strain ASTM D 695
    Compression modulus 450,000 psi @ 73 °F ASTM D 695
    Impact strength (Izod) 0.75 ftlbsin ASTM D 256
    Rockwell hardness 88 - M Scale ASTM D 785
    Rockwell hardness 117 R scale ASTM D 785
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Condition Test Method
    Melting temperature 499 F -
    Service temperature 338 F Intermittent -
    Service temperature 230 F Long Term -
    Thermal expansion (CLTE) 2.7*10-5 ininF ASTM D 696
    Specific heat 0.3 butlbf -
    Thermal conductivity 2.71 BTU-in/hr-ft^2 - deg -
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Condition Test Method
    surface resistivity 1.0*1014 Ω/square ASTM D 257
    volume resistance 1.0*1014 Ω*cm -
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Condition Test Method
    Moisture absorption 0.25 % @ 24 hrs, 73 °F ASTM D 570
    Moisture absorption 0.30 % @ saturation, 73 °F ASTM D 570

Stock program