TECASINT 1011 natural

unfilled polyimide

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS-Q-70-20. Its previous name was SINTIMID Pur HT.

Facts

Chemical designation
PI (Polyimide)
Colour
black
Density
1.34 g/cm3

Main Features

  • very good thermal stability
  • high thermal and mechanical capacity
  • very good electrical insulation
  • good chemical resistance
  • resistance against high energy radiation
  • low outgassing
  • high creep resistance
  • sensitive to hydrolysis in higher thermal range

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Notched impact strength (Charpy) 5 kJ/m2 max 7.5 J DIN EN ISO 179-1
    Impact strength (Charpy) 75.8 kJ/m2 max 7.5 J DIN EN ISO 179-1
    Shore hardness 90 Shore D DIN EN ISO 868
    Tensile strength 116 MPa 50 mm/min DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    3600 MPa 1 mm/min DIN EN ISO 527-1
    Flexural strength 170 MPa 10 mm/min DIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3450 MPa 2 mm/min DIN EN ISO 178
    Compression modulus 3647 MPa 1 mm/min EN ISO 604
    Compressive strain at break 45 % 10 mm/min EN ISO 604
    Elongation at break (tensile test) 3.8 % 50 mm/min DIN EN ISO 527-1
    Compression strength 450 MPa 10 mm/min EN ISO 604
    Compression strength 190 MPa 10mm/min, 10% strain EN ISO 604
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 383 C -
    Heat distortion temperature 368 C 1.85 MPa DIN 53 461
    Specific heat 1.04 J/(g*K) -
    Thermal conductivity 0.22 W/(k*m) 40°C ISO 8302
    Thermal expansion (CLTE) 4.3 10-5*1/K 50-200°C DIN 53 752
    Service temperature 280 C long term -
    Thermal expansion (CLTE) 5.3 10-5*1/K 200-300°C DIN 53 752
  • product-technical-detail-collapse-item-2-lvl-1
    Electrical properties Value Unit Parameter Norm
    surface resistivity 1015 23°C DIN IEC 60093
    volume resistivity 1015 Ω*cm 23°C DIN IEC 60093
    Electric strength DC 35 kV*mm-1 23°C ISO 60243-1
    Dielectric loss factor 2.2*10-2 50 Hz DIN 53483-1
    Dielectric loss factor 2.5*10-3 1 kHz DIN 53483-1
    Dielectric loss factor 1.5*10-2 1 MHz DIN 53483-1
    Dielectric constant 3.8 50 Hz DIN 53483-1
    Dielectric constant 3.9 1 kHz DIN 53483-1
    Dielectric constant 3.7 1 MHz DIN 53483-1
  • product-technical-detail-collapse-item-3-lvl-1
    Other properties Value Unit Parameter Norm
    Flammability (UL94) V0 - corresponding to DIN IEC 60695-11-10;
    Outgassing in high vacuum passed ECSS-Q-70-02
    Water absorption 1.3 % 24 h in water, 23°C DIN EN ISO 62
    Water absorption 3.8 % 24 h in water, 80°C DIN EN ISO 62

Stock program