TECAMID 6 MO black

PA 66 with MoS2

The addition of molybdenum disulphide (MoS2) to PA66 produces a material with improved sliding and friction properties. This is achieved as a result of the additive's structure, and its nucleating effect. This effect also increases the rigidity, hardness and dimensional stability of this filled PA 66. Conversely, the impact strength of the modified polyamide 66 is reduced.

Facts

Chemical designation
PA 6 (Polyamide 6)
Colour
black
Density
1,14 g/cm3

Main Features

  • good slide and wear properties
  • high strength
  • good wear properties
  • high toughness
  • resistant to many oils, greases and fuels
  • improved surface hardness

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Tensile strength at yield82MPa50mm/minDIN EN ISO 527-2
    Elongation at break37%50mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    3300MPa1mm/minDIN EN ISO 527-2
    Ball indentation hardness160MPaISO 2039-1
    Impact strength (Charpy)n.b.kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Tensile strength84MPa50mm/minDIN EN ISO 527-2
    Elongation at yield5%50mm/minDIN EN ISO 527-2
    Flexural strength110MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3100MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength17/32/79MPa1% / 2% / 5%EN ISO 604
    Compression modulus2900MPa5mm/min, 10 NEN ISO 604
    Notched impact strength (Charpy)5kJ/m2max. 7,5JDIN EN ISO 179-1eA
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Glass transition temperature51CDIN EN ISO 11357
    Service temperature160Cshort termNN
    Service temperature100Clong termNN
    Thermal expansion (CLTE)810-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)810-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Melting temperature220CDIN EN ISO 11357
    Thermal conductivity0.37W/(k*m)ISO 22007-4:2008
    Specific heat1.6J/(g*K)ISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    volume resistivity1014O*cmSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    surface resistivity1014OSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    Dielectric strength30kV/mm23°C, 50% r.h.ISO 60243-1
    Resistance to tracking (CTI)600VPlatin electrode, 23°C, 50% r.h., solvent ADIN EN 60112
  • Other properties
    Other propertiesValueUnitParameterNorm
    Water absorption0.6%24h / 96h (23°C)DIN EN ISO 62
    Flammability (UL94)HB-corresponding toDIN IEC 60695-11-10;
    Resistance to hot water/ bases(+)--
    Resistance to weathering(+)-NN

Stock program