PA 6 C lubricated

TECAGLIDE green is an internally lubricated cast nylon that utilizes a proprietary solid lubricant package. This state of the art technology allows the modified PA6 cast to show extremely good sliding and wear characteristics with very low friction and reduced abrasion, even in dry running conditions. The PA 6 C with lubricant is resistant to most petroleum based products, and exhibits a high level of ductility and toughness.


Chemical designation
PA 6 C (Cast polyamide 6)
1,13 g/cm3

Main Features

  • good slide and wear properties
  • resistant to many oils, greases and fuels
  • electrically insulating
  • high toughness
  • good wear properties
  • high mechanical load capacity

Target industries

Technical details

  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Modulus of elasticity
    (tensile test)
    3200MPa1mm/minDIN EN ISO 527-2
    Tensile strength76MPa50mm/minDIN EN ISO 527-2
    Tensile strength at yield76MPa50mm/minDIN EN ISO 527-2
    Elongation at yield14%50mm/minDIN EN ISO 527-2
    Elongation at break18%50mm/minDIN EN ISO 527-2
    Flexural strength103MPa2mm/min, 10 NDIN EN ISO 178
    Modulus of elasticity
    (flexural test)
    3100MPa2mm/min, 10 NDIN EN ISO 178
    Compression strength18/34/75MPa1% / 2% / 5%EN ISO 604
    Compression modulus2500MPa5mm/min, 10 NEN ISO 604
    Impact strength (Charpy)n.b.kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Notched impact strength (Charpy)4kJ/m2max. 7,5JDIN EN ISO 179-1eA
    Ball indentation hardness159MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Glass transition temperature45CDIN EN ISO 11357
    Melting temperature218CDIN EN ISO 11357
    Service temperature130Cshort termNN
    Service temperature100Clong termNN
    Thermal expansion (CLTE)1210-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Thermal expansion (CLTE)1110-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Thermal conductivity0.38W/(k*m)ISO 22007-4:2008
    Specific heat1.7J/(g*K)ISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    volume resistivity1014O*cmDIN IEC 60093
    surface resistivity1014ODIN IEC 60093
  • Other properties
    Other propertiesValueUnitParameterNorm
    Resistance to hot water/ bases(+)--
    Flammability (UL94)HB-corresponding toDIN IEC 60695-11-10;
    Resistance to weathering---
    Water absorption0.3%24h / 96h (23°C)DIN EN ISO 62

Stock program