TECASON P MT black

black PPSU medical

TECASON P MT black is a polyphenylsulfone suited primarily to applications in the medical industry. PPSU medical grade material has improved performance in terms of temperature, impact strength and chemical resistance, and shows exceptional resistance to repeated steam autoclaving without loss of dimensional stability, or physical properties. Medical grade PPSU is available in several colored grades, as well as with an X-ray opaque XRO additive which allows for clear component visibility on fluorscopy and X-ray.

Compliances

Facts

Chemical designation
PPSU (Polyphenylsulfone)
Colour
black
Alternative colours available
browngreengreyyelloworangeivorybluered
Density
1,31 g/cm3

Main Features

  • high thermal and mechanical capacity
  • good heat deflection temperature
  • high stiffness
  • hydrolysis and superheated steam resistant
  • high strength
  • good impact strength
  • good chemical resistance
  • high gamma radiation resistance

Target industries

Technical details


  • Mechanical properties
    Mechanical propertiesValueUnitParameterNorm
    Modulus of elasticity
    (flexural test)
    2300MPa2mm/min, 10 NDIN EN ISO 178
    Elongation at break50%50mm/minDIN EN ISO 527-2
    Compression strength18/30/66MPa1% / 2% / 5%EN ISO 604
    Compression modulus2000MPa5mm/min, 10 NEN ISO 604
    Elongation at yield7%50mm/minDIN EN ISO 527-2
    Tensile strength at yield81MPa50mm/minDIN EN ISO 527-2
    Tensile strength81MPa50mm/minDIN EN ISO 527-2
    Modulus of elasticity
    (tensile test)
    2300MPa1mm/minDIN EN ISO 527-2
    Notched impact strength (Charpy)13kJ/m2max. 7,5JDIN EN ISO 179-1eA
    Impact strength (Charpy)n.b.kJ/m2max. 7,5JDIN EN ISO 179-1eU
    Flexural strength107MPa2mm/min, 10 NDIN EN ISO 178
    Ball indentation hardness143MPaISO 2039-1
  • Thermal properties
    Thermal propertiesValueUnitParameterNorm
    Thermal expansion (CLTE)610-5*1/K23-60°C, long.DIN EN ISO 11359-1;2
    Service temperature190Cshort termNN
    Service temperature170Clong termNN
    Thermal expansion (CLTE)610-5*1/K23-100°C, long.DIN EN ISO 11359-1;2
    Melting temperaturen.a.CDIN EN ISO 11357
    Glass transition temperature218CDIN EN ISO 11357
    Specific heat1.1J/(g*K)ISO 22007-4:2008
    Thermal conductivity0.25W/(k*m)ISO 22007-4:2008
  • Electrical properties
    Electrical propertiesValueUnitParameterNorm
    surface resistivity1014OSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    volume resistivity1014O*cmSilver electrode, 23°C, 12% r.h.DIN IEC 60093
    Dielectric strength76kV/mm23°C, 50% r.h.ISO 60243-1
    Resistance to tracking (CTI)125VPlatin electrode, 23°C, 50% r.h., solvent ADIN EN 60112
  • Other properties
    Other propertiesValueUnitParameterNorm
    Resistance to weathering(+)--
    Resistance to hot water/ bases+--
    Flammability (UL94)V0-listed (value at 0.79mm)DIN IEC 60695-11-10;
    Water absorption0.2%24h / 96h (23°C)DIN EN ISO 62

Stock program