TECAPEEK IM GF30 natural

injection moulded PEEK with 30% glass fibre

Injection moulded stock shapes of a Victrex PEEK polymer, and 30% glass fibre are available under the tradename TECAPEEK IM GF30 natural. This modification provides increased strength and rigidity. The outer diameter of tubes made from this glass fibre reinforced PEEK vary between 31,75 mm to 177,8 mm, the inner diameter varies from 12,7 to 152,4 mm. Lengths of 76,2 and 152,4 mm are the standard.

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
beige
Density
1.51 g/cm3

Main Features

  • high dimensional stability
  • very good chemical resistance
  • inherent flame retardant
  • good heat deflection temperature
  • hydrolysis and superheated steam resistant
  • good machinability
  • very high creep resistant

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 180 MPa 50mm/min ASTM D 638
    Elongation at break (tensile test) 2.8 % 50 mm/min ASTM D 638
    Modulus of elasticity
    (flexural test)
    11000 MPa 2mm/min, 10 N ASTM D 790
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 150 C DIN EN ISO 11357
    Melting temperature 341 C DIN EN ISO 11357
    Service temperature 300 C short term -
    Service temperature 300 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €€€€€

Stock program