PA66-Compounds-TECACOMP-PA66-CF20-HI-black
PA66-Compounds-TECACOMP-PA66-CF20-HI-black

TECACOMP PA66 CF20 HI black 1014994

Heat stabilised PA 66 composite with 20 % carbon fiber reinforcement

Nylon 66 is one of the most frequently used engineering thermoplastics, especially in the automotive industry, mechanical engineering and electrical engineering. Its good mechanical properties are further strengthened by 20 % carbon fibers. 

TECACOMP PA66 CF20 HI black is developed with a heat stabiliser that intervenes in the thermo-oxidative degradation of the plastic and delays damage caused by the effects of temperature and oxygen. 

The compound is characterised by increased dimensional stability under heat and can be used up to 110 °C permanently and up to 170 °C for short periods. Due to its high viscosity, this compound is particularly suitable for simpler component molds with injection molding.

Facts

Chemical designation
PA 66 (Polyamide 66)
Colour
black
Density
1.22 g/cm3

Main Features

  • moderate stiffness
  • good wear properties
  • good heat deflection temperature
  • resistant to many oils, greases and fuels
  • good weldable and bondable
  • heat stabilized
  • low viscosity

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 204 MPa DIN EN ISO 527-1
    Modulus of elasticity
    (tensile test)
    14600 MPa DIN EN ISO 527-1
    Elongation at break (tensile test) 2,7 % DIN EN ISO 527-1
    Impact strength (Charpy) 47 kJ/m2 DIN EN ISO 179-1eU
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 5 - 72 C -
    Melting temperature 260 C -
    Heat distortion temperature 255 C ISO-R 75 Method A
    Service temperature 170 C short term -
    Service temperature 110 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Processing parameter Value Unit Parameter Norm
    Mould temperature 80 - 110 C -
  • product-technical-detail-collapse-item-3-lvl-1
    Predrying Value Unit Parameter Norm
    Permissible residual moisture content 0,1 % -
    Drying temperature 80 - 120 C -
    Drying time 4 - 8 h -