TECAPEEK IM natural

injection moulded PEEK

Injection moulded stock shapes from Victrex PEEK polymer are handled under the tradename TECAPEEK IM natural. Injection moulded tubes range from 31,75 inch to 177,8 mm OD and provide wall thicknesses up to 14,22 mm. Standard lengths are 76,2 and 152,4 mm.

Facts

Chemical designation
PEEK (Polyetheretherketone)
Colour
beige
Density
1.3 g/cm3

Main Features

  • very good chemical resistance
  • inherent flame retardant
  • good heat deflection temperature
  • hydrolysis and superheated steam resistant
  • good machinability
  • good slide and wear properties

Target industries

Downloads

Technical details


  • product-technical-detail-collapse-item-0-lvl-1
    Mechanical properties Value Unit Parameter Norm
    Tensile strength 95 MPa 50mm/min ASTM D 638
    Elongation at break (tensile test) 45 % 50 mm/min ASTM D 638
    Flexural strength 124 MPa 2mm/min, 10 N ASTM D 790
    Modulus of elasticity
    (flexural test)
    3700 MPa 2mm/min, 10 N ASTM D 790
  • product-technical-detail-collapse-item-1-lvl-1
    Thermal properties Value Unit Parameter Norm
    Glass transition temperature 150 C DIN EN ISO 11357
    Melting temperature 341 C DIN EN ISO 11357
    Service temperature 300 C short term -
    Service temperature 300 C long term -
  • product-technical-detail-collapse-item-2-lvl-1
    Relative costs Value Unit Parameter Norm
    Relative costs EU from € to €€€€€€ €€€€€

Stock program